BoxXmen

Industrial box design and end-to-end packaging automation.

We design and develop industrial packaging that survives shipping, uses less material and costs less.

Scroll to open the box · drag to turn it

Step 1 · Product first

Start from what goes inside

The product sets the pack. We fix the part in end caps or partitions first, then draw the box around it. Move the sliders and the carton on screen resizes with you.

Style
FEFCO 0201 (RSC)
Flat blank
Board per box

Nominal blank: 2L + 2W + 35 mm glue flap, by H + W. Scoring allowances for board grade are added at design stage.

Step 2 · Material

Board you can defend

Corrugated board is two flat liners holding a fluted medium apart. Fibre source, flute profile and paper weight decide how much a box can carry and how it behaves when damp.

  • Outer linerPrint face and first barrier. Virgin kraft or recycled test liner, chosen by load and climate.
  • FlutingThe arches. Profile and paper weight set stacking strength and cushioning.
  • Inner linerProduct side. Coatings only where the product or the route needs them.
  • Checked byBurst, edge crush, box compression and Cobb water absorption.

Step 3 · Transit

Proved before it ships

A pack is finished when it survives the route. Each design is planned against a recognised test sequence so the result means something to your customer's quality team.

  • ASTM D4169Distribution cycle: handling, stacking, vehicle vibration.
  • ISTA 2A / 3ADrop, vibration and compression for packaged products and parcels.
  • TAPPI T804Box compression test, also ISO 12048.

Step 4 · Logistics

Counted to the pallet

Freight is paid by the pallet and the truck. The same dimensions you set above are stacked here.

Carton
Pallet
Per layer
Layers
Cartons per pallet
Deck area used

Column stack, one orientation per layer, no overhang. Change the pallet in the pallet planner.

Studio renders

The same pack, ray-traced

Built from the real board construction: two liners, a fluted medium, flutes running vertically in every wall.

Ray-traced render of a closed, taped BoxXmen carton Ray-traced render of the open carton with a steel part held in two foam end caps Ray-traced render of a foam end cap showing its round seat, the steel part and a cut board sample

Services

Four ways we help

Packaging design

Structural design, dielines, CAD drawings and prototypes for corrugated, folding carton and industrial packs.

Cost and material reduction

Existing packs redesigned to use less board or plastic and still pass strength and transit tests.

Testing and quality

Compression, drop and transit test planning, supplier quality checks and inspection protocols.

Sustainable packaging

Plastic-to-paper switches, recyclable designs and packaging data for sustainability reports.

Process

From brief to production in four steps

  1. 1

    Free 30-minute call

    No charge, no obligation.

  2. 2

    Design and drawings

    Structural drawings, dielines and a material recommendation with written reasons.

  3. 3

    Prototype and test

    A physical prototype, with compression and transit tests planned or run.

  4. 4

    Production handover

    Production-ready files and a supplier brief.

About the founder

Adithya G Udupa

Mechanical engineer, packaging specialist.

8+ years in sustainable packaging, including leading global sustainable packaging at a multinational industrial manufacturer. Based in Bengaluru and works directly on every project.

Contact

Tell us what you are packing

A drawing, a photo with dimensions or a sample is enough to begin. We reply within 1 working day.